The Fowler Universal-type V-Block is a precise tool used for layout work in the toolroom and has the capability of holding square or round workpieces with greater accuracy.
Features:
• Two clamps, with screw hole at 90 degrees for positive clamping of work, are included.
• Clamping capacity=2"(50mm.)
• V-Blocks are constructed with stepped grooves which allow the clamps to be inserted without protrusion, thus allowing V-Blocks to be used on base, ends or sides.
• Hardened steel. All sides of V-Blocks precision ground parallel and square within .0004".
• Matched pair of V-Blocks are perfectly aligned with 90 degree V-grooves ground central and parallel to the sides and base.
Height: 2″
Length: 2-3/4″
Width: 2″
Features:
• Two clamps, with screw hole at 90 degrees for positive clamping of work, are included.
• Clamping capacity=2"(50mm.)
• V-Blocks are constructed with stepped grooves which allow the clamps to be inserted without protrusion, thus allowing V-Blocks to be used on base, ends or sides.
• Hardened steel. All sides of V-Blocks precision ground parallel and square within .0004".
• Matched pair of V-Blocks are perfectly aligned with 90 degree V-grooves ground central and parallel to the sides and base.
Height: 2″
Length: 2-3/4″
Width: 2″
Write Your Own Review