Fowler, 11” x 4” x 3” Machining Vise, 57-226-411-0
Fowler precision N/C vises have bi-directional 11⁄16" keyways ground in the bottom to allow rapid installation and automatic alignment. These precision vises will bolt easily onto N/C, milling, EDM or other machines. All four sides are slotted to provide a multitude of clamping possibilities.
Both the fixed and moveable jaws are stepped to permit the effortless holding of pieces as small as 1⁄2" x 1⁄2" or as large as 7-1⁄2" x 8-1⁄2", depending on the model. This offers more capacity than comparable vises on the market today due to a new angled channel. All jaw opening changes can be accomplished without unbolting the vise from the work surface.
Features:
• Bodies and moveable jaws are solid one piece construction.
• Can be purchased in pairs with matched accuracy to .0001" or .0002"
• Hardened to: RC58-62.
• Flat, square and parallel to .0003"
Both the fixed and moveable jaws are stepped to permit the effortless holding of pieces as small as 1⁄2" x 1⁄2" or as large as 7-1⁄2" x 8-1⁄2", depending on the model. This offers more capacity than comparable vises on the market today due to a new angled channel. All jaw opening changes can be accomplished without unbolting the vise from the work surface.
Features:
• Bodies and moveable jaws are solid one piece construction.
• Can be purchased in pairs with matched accuracy to .0001" or .0002"
• Hardened to: RC58-62.
• Flat, square and parallel to .0003"
Write Your Own Review